Saw Type Cutter

***

Detail

Parameters

Saw type cutter

Equipment summary:

It can cut hard tubesor hard strips or with steel core products.

Cuttingprecision, simple operation, can achieve synchronous extrusion production andcutting.

Detailed parameters:

(1) Tractiondrive motor: 0.75kw

(2) Tractionspeed: inverter control

(3) Maximumtraction speed: 28m/min

(4) Inverter: ABB brand

(5) The speed iscontrolled by potentiometer knob, which can be fine-tuned.

(6) Controlpanel buttons: with start button, stop button, manual cutting button, resetbutton, emergency stop button.

(7) Cuttinglength, cutting speed, cutting cumulative quantity, arrival alarm, errorcompensation, automatic control and manual control can be set on Siemens TouchScreen made in Germany company.

(8) Upper andlower traction belt: rubber multi-wedge belt, non-skid

(9) Effectivelength of traction contact: 450mm

(10) Tractionspeed transmission: the dance-controls the proximity switch and transmits thesignal to the Siemens PLC controller of the tractor to realize synchronouscontrol.

(11) MeterController Brand: Omron, Japan

(12) Setting upleft and right stainless steel guide rollers to prevent deviation of products

(13) Cuttingmethod: Saw type cutting

(14) Cuttingdrive motor: ordinary two-stage motor or servo motor can be used, 0.75 kw

(15) Cuttingcontrol: non-stop drive or servo controller

(16) PLC systemadopts Germany Siemens brand

(17) Contactors:using the French Schneider brand

(18) Theoperating box is located above the equipment.

(19) Work centerheight: 1000mm, work height can be adjusted up and down appropriately.

(20)Transmission mode: rubber synchronous belt transmission

(21) Equippedwith cutter cover

(22) Contactors:using the French Schneider brand