- Detail
- Parameters
Honeycomb Ceramics Vacuum Feeding Device
(1) Using double roller feeding structure, force feeding mud.
(2) Each roller using rhombus block group for better mixing effect.
(3) Double roller using relative direction of rotation to make the mud feeding smoothly.
(4) This structure will avoid mud into the bearing. It will enhance the working life of the machine.
(5) The inner of the device using groove structure to make the screw push out the mud smoothly.
(6) The inner of the device loaded with wear-resisting pin, able to change to increase working life.
(7) Feeding entrance equipped with transparent vacuum case to pump the excess air in the mud.
(8) Feeding device up hole can put sealing ring,vacuum degree can reach 85-90%.
(9) Material using 304 stainless steel.
(10) Entire feeding device using water cooling.
(11) Using gear drive.
(12) Motor power 7.5kw, by inverter control.
Honeycomb ceramics extruder is exclusively used in the production of honeycomb structure ceramic products, senior fine ceramic products.
Honeycomb ceramics extruder carrier main material: cordierite
(1) Main application: to make HC, CO, NOX etc. harmful gas to harmless gas.
(2) Gasoline motor car tail gas clean-up catalyst carrier
(3) Diesel powered car tail gas clean-up catalyst carrier
(4) Diesel particle filter carrier DPF
(5) Industrial waste gas catalyst carrier
Ceramic extruder technology reference Germany dr. Frank Hndle’s ECT company, which is very reliable.
