- Detail
- Parameters
Traction cutting machine
Equipmentsummary:
One rubber sealing rod can be cut at a time. The cutproduct can be used for the next process, or for the production of pre-formedproducts.
Used for rubber pipe or sealing strip, silicone pipe orsealing strip, hose or soft sealing strip.
Cutting precision, simple operation, can achievesynchronous extrusion production and cutting.
1.Conveyor tractor:
(1) Traction drive motor: 0.75kw
(2) Traction speed: inverter control
(3) Maximum traction speed: 28m/min
(4) Inverter: adopt Swiss ABB brand
(5) The speed is controlled by potentiometer knob, whichcan be fine-tuned.
(6) Control panel button: with start button, stop button,speed control knob, emergency stop button
(7) Upper and lower traction belt: rubber multi-wedge belt,non-skid.
(8) Effective length of traction contact: 450mm
(9) Traction speed transmission: from meter controller toSiemens PLC controller of cutting machine to realize synchronous control
(10) Meter Controller Brand: Omron, Japan
(11) If the control of infrared light sensitivity isincreased, the effect will be better, and the synchronous control can berealized with the equipment in the previous stage.
(12) Brand of Infrared Light Sensor Controller: Omron,Japan
(13) Work center height: 1000mm, work height can beadjusted up and down appropriately.
(14) Setting up left and right stainless steel guiderollers to prevent deviation of products
(15) Contactors: using the French Schneider brand
(16) Color: Blue
(17) Shape size: 800 (L) X800 (W) X1500 (H)
(18) Weight: 300 kg
2.Knife-throwing Cutter:
(1) Cutting method: using flip-knife cutting
(2) Cutting drive motor: 1.1KW servo motor
(3) Cutting Control: Servo Controller
(4) Transmission mode: rubber synchronous belt transmission
(5) equipped with cutter cover and lubrication storage box
(6) Cutting length, cutting speed, cutting cumulativequantity, arrival alarm, error compensation, automatic control and manualcontrol can be set on the touch screen of Siemens made in Germany company.
(7) Signals are transmitted to the Omron Meter Controllerin Japan.
(8) The PLC system adopts the German Siemens brand.
(9) Contactors: using the French Schneider brand
(10) The operating box is located above the equipment.
(11) Transport mode in back section: SPVC conveyor beltconveyor
(12) Effective length of rear section conveying: 800mm
(13) Center height: 1000mm
(14) Shape size: 1200 (L) X800 (W) X1500 (H) mm
(15) Weight: 300 kg
