- Detail
- Parameters
75 mm butyl rubber extrusion machine
1. 75mm butyl rubber extruder:
(1) Screwdiameter: 75mm, L/D 16:1
(2) Screw material: 38CrMoAl, nitriding treatment
(3) Screw speed: 0-40 rpm, speed is regulated by inverter
(4) Screw material: 38CrMoAl, nitriding treatment
(6) Screw andbarrel heating and cooling mode: for water heating and water cooling, by thermoregulationunit
(7) Thermoregulationunit: 6kw, by water, 3 pcs
(8) Feeding mode: cold feeding with double pressure rollers for feeding lumps
(9) Feeding motorpower: 3kw
(10) Feedingroller speed: 0-15 rpm, speed is regulated by frequency converte
(11) Output: 120-160 kg/h
(12) Gear box: hard tooth face gear
(13) AC motor: 22kw, motor controlled by inverter
(14) Contactor: SCHNEIDER band
(15) Frame: Welding of Square Steel Pipe and Iron Plate
(16) Dimensionsize: 2450 (L) x 1500 (W) x 1700 (H) mm
(17) Installationpower: 40 kW
2. T-type Extrusion head:
(1) Product width: 200mm
(2) It can extrude several butyl rubber strips at the same time or butyl rubber sheet
(2) Heating and cooling by thermoregulation unit
3. Vacuum convey machine:
(1) Convey motor: 0.5kw
(2) Convey speed: 0-10m/min
(3) Speed is controlledby inverter
(4) Convey mode: vacuum convey
(5) Vacuum pumppower: 0.75kw
(6) Convey belt width: 300mm
(7) Platform canbe cooled by water
(8) The platformcan slide back and forth
(9) Releasing paper is released an inflatable shaft.
(10) Releasing paper can be released from top and bottom.
4. Dual-position winder:
(1) Double knives cut off both sides of products
(2) Knives material: SKD 61
(3) Pneumatic cutting is adopted
(4) The bottom roller speed speed can be adjusted by inverter
(5) Bottom roller material: 38CrMoAl, nitrided
(6) Adopting double-station winding
(7) Winding motor adopts torque motor
(8) Products are wound by an inflatable shatf
(9) Synchronous control
5. Some products can be made: adhesive, sheet, artificial anus, adhesive tape, electric power insulation tape, car headlights adhesive tape, acne patch, etc.
